Development of U.S. EPA method 527 for the analysis of selected pesticides and flame retardants in the UCMR survey

Method 527 was developed to address the occurrence monitoring needs of the U.S. Environmental Protection Agency (EPA) under its second unregulated contaminant monitoring rule (UCMR 2). This method includes a wide range of semivolatile organic contaminants, including pesticides that were deferred during the first UCMR, flame retardants, and pyrethroid pesticides. This paper discusses the rationale for selection and inclusion of the various contaminants included in Method 527 and describes the challenges associated with developing analytical methods that will be used for the occurrence monitoring of such a diverse group of organic molecules. Method 527 employs solid-phase extraction with analysis by gas chromatography/ mass spectrometry (GC/MS). The final method preservation scheme requires the storage of samples in amber bottles buffered at pH 3.8 using citric acid to prevent degradation from acid-catalyzed hydrolysis and from UV light. Citric acid is also an effective antimicrobial reagent, preventing this mode of loss during storage. Ethylenediaminetetraacetic acid (EDTA) is added to remove transition metals such as copper, which was determined to degrade target analytes upon storage. Finally, free available chlorine (FAC), which is present in many finished waters and found to degrade a number of the targets, is removed using ascorbic acid. The final method meets all of the EPA UCMR survey requirements for sample storage, precision, accuracy, and sensitivity and will be proposed for use under the UCMR 2.