| 铁基石墨复合材料在矿井罐笼导向套上的应用研究 |
| |
| 引用本文： | 赵越超,孙满春. 铁基石墨复合材料在矿井罐笼导向套上的应用研究[J]. 铸造技术, 2007, 28(4): 495-496 |
| |
| 作者姓名： | 赵越超 孙满春 |
| |
| 作者单位： | 辽宁工程技术大学,辽宁 阜新 123000 |
| |
| 摘 要： | 将铸铁屑和石墨按照不同的比例（1%、2%、3%、4%）混合、压块,采用粉末烧结方法得到铁基石墨复合材料,通过对试样的金相组织观察、硬度和磨损实验的分析,确定出试样最好的石墨含量为2%,并阐述了此种材料在煤矿竖井罐笼导向衬套上应用的可行性及其发展前景。
|
| 关 键 词： | 烧结 铁基-石墨复合材料 耐磨性 |
| 文章编号： | 1000-8365(2007)04-0495-02 |
| 修稿时间： | 2004-10-25 |
Application of Iron Matrix Graphite Composite on the Colliery Vertical Shaft Tin Guiding Bush |
| |
| ZHAO Yue-chao,SUN Man-chun. Application of Iron Matrix Graphite Composite on the Colliery Vertical Shaft Tin Guiding Bush[J]. Foundry Technology, 2007, 28(4): 495-496 |
| |
| Authors: | ZHAO Yue-chao SUN Man-chun |
| |
| Affiliation: | 1. Institute of Material Science and Engineering, Liaoning Technology University, Fuxin 123000, China |
| |
| Abstract: | Iron matrix graphite composite was prepared by mixing different proportion of grey iron wafer and graphite(1%,2%,3% and 4%),compacting and sintering.The best graphite content is 2% though the analysis on the microstructure,hardness and wear resistance.The feasibility and developing prospect of the application of the material on colliery vertical shaft tin guiding bush are discussed. |
| |
| Keywords: | Sintering Iron matrix graphite composite Wear resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
