| 对40Cr钢表层硬度残余应力及接触疲劳性能的研究 |
| |
| 引用本文： | 洪鹤,孙家仲,马春艳,王佳华,朱荆璞,孟祥东. 对40Cr钢表层硬度残余应力及接触疲劳性能的研究[J]. 沈阳工业大学学报, 2001, 23(6): 463-466 |
| |
| 作者姓名： | 洪鹤 孙家仲 马春艳 王佳华 朱荆璞 孟祥东 |
| |
| 作者单位： | 1. 沈阳工业大学材料科学与工程学院,
2. 元宝山发电厂, |
| |
| 摘 要： | 研究了表面淬火、离子氮化＋表面淬火的复合热处理以及复合热处理＋喷丸处理3种表面强化处理工艺对40Cr钢的表层硬度残余应力分布以及接触疲劳性能的影响，结果表明：经过复合热处理＋喷丸工艺处理的40Cr钢可获得最高的表层硬度和残余压应力，同时也表现出最为优异的接触疲劳性能。据此提出，高的表层硬度和残余应力能够有效地抑制接触疲劳裂纹在试样表面的萌生和扩展，因而可大大提高40Cr钢的接触疲劳寿命。
|
| 关 键 词： | 复合热处理 接触疲劳 残余应力 裂纹 疲劳寿命 40Cr钢 40路钢 表层硬度 |
| 文章编号： | 1000-1646(2001)06-0463-04 |
| 修稿时间： | 2001-07-30 |
Influence of surface treatment on hardness and residual stress as well as contact fatigue properties of 40 Cr steel |
| |
| HONG He,SUN Jia-zhong,MA Chun-yan,MENG Xiang-dong,WANG Jia-hua,ZHU Jing-pu. Influence of surface treatment on hardness and residual stress as well as contact fatigue properties of 40 Cr steel[J]. Journal of Shenyang University of Technology, 2001, 23(6): 463-466 |
| |
| Authors: | HONG He SUN Jia-zhong MA Chun-yan MENG Xiang-dong WANG Jia-hua ZHU Jing-pu |
| |
| Affiliation: | HONG He1,SUN Jia-zhong1,MA Chun-yan1,MENG Xiang-dong2,WANG Jia-hua1,ZHU Jing-pu1 |
| |
| Abstract: | In this paper,the influence of three surface treatment techniques incld ding as high -frequency quenching,complex heat treatment a dding ion -intriding and high -frequ ency quenching,and complex heat treatment shot peening on properti es of 40Cr steel were studied.It was s hown that 40Cr steel subjected to com-plex heat treatment shot peening ex hibited the highest hardness and residual compressive stress as well as m ost excellent contact fatigue performa nce.It is suggested that the high hardness and residual compressive stre ss can effectrol restrain the initiation a nd propagation of contact fatigue crack on specimen surface and lead to lo nger fa-tigue life. |
| |
| Keywords: | complex heat treatment s hot peening contact fatigue crack initiation and propogation of residualstress fatigue life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
