| 模具曲面的C1连续刀具路径加工 |
| |
| 引用本文： | 彭宽平,林昌杰. 模具曲面的C1连续刀具路径加工[J]. 机床与液压, 2006, 0(2): 95-96 |
| |
| 作者姓名： | 彭宽平 林昌杰 |
| |
| 作者单位： | 武汉职业技术学院机械系,湖北武汉430074;武汉交通职业学院,湖北武汉430062 |
| |
| 摘 要： | 模具曲面加工时,一种方法是采用C0连续刀具路径加工;本文论述了另一种方法即采用C1连续刀具路径加工。后一种方法得到的G代码NC文件更小,加工出来的曲面几何尺寸更精确,表面粗糙度更低,加工和抛光时间更少。
|
| 关 键 词： | 曲面 加工 连续刀具路径 直线小段 圆弧小段 |
| 文章编号： | 1001-3881(2006)2-095-2 |
| 收稿时间： | 2004-11-02 |
| 修稿时间： | 2004-11-02 |
The Machining of Curved Surfaces of Mould by Use of C1 Continuous Tool Path |
| |
| PENG Kuanping,LIN Changjie. The Machining of Curved Surfaces of Mould by Use of C1 Continuous Tool Path[J]. Machine Tool & Hydraulics, 2006, 0(2): 95-96 |
| |
| Authors: | PENG Kuanping LIN Changjie |
| |
| Affiliation: | 1. Department of Mechanical Engineering, Wuhan Technical College, Wuhan 430074, China; 2. Wuhan Communication Technical College, Wuhan 430062, China |
| |
| Abstract: | To enable curved surfaces to be machined,the first method is C~0 continuous tool path.The second method,C~1 continuous tool path was introduced in this paper.It is found that C~1 continuous tool path provides:smaller G-code files size;more accurate geometrical dimensions;lower surface roughness;lower polishing volume and consequently lower polishing time. |
| |
| Keywords: | Curved surfaces Machining Continuous tool path Linear segment Circular segments |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
