| Abstract: | It is possible to realize surface alloys by laser melting an electroless nickel layer containing chromium carbide particles predeposited on a mild steel substrate. By this way the surface alloy is expected to have not only a high nickel content but also an important chromium content in order to improve the corrosion resistance. The presence of chromium in solid solution results from the dissolution or melting of the carbide particles. Typical laser solidification microstructures are obtained. Dendrites consist of an austenitic Fe-Ni-Cr solid solution and interdendritic regions are constituted by an eutectic mixture containing the same austenitic solid solution and complex Fe, Ni, Cr carbides and phosphides. In comparison with a surface alloy obtained by laser melting of an electroless nickel layer without carbide particles, the corrosion resistance was slightly improved in saline aqueous solutions. The limited effect was due to the fact that the final chromium content in the present experimental conditions was not as high as that initially expected. |
