| 板料拉深成形数值模拟中动态边界条件的处理 |
| |
| 引用本文： | 孙国祥,黄桂美,詹艳然. 板料拉深成形数值模拟中动态边界条件的处理[J]. 现代制造工程, 2006, 0(12): 59-61 |
| |
| 作者姓名： | 孙国祥 黄桂美 詹艳然 |
| |
| 作者单位： | 福州大学机械工程学院,福州,350002;福州大学机械工程学院,福州,350002;福州大学机械工程学院,福州,350002 |
| |
| 摘 要： | 针对板料拉深成形过程中工件与模具接触边界的动态变化,将模具表面离散为若干个三角形单元,并用参数方程来描述工件节点及模具三角形单元的运动情况,将工件与模具的接触问题转化为空间直线与平面的动态求交问题。在此基础上,通过实际的模拟分析,证明该处理方法的可行性。
|
| 关 键 词： | 板料成形 数值模拟 动态边界 |
| 文章编号： | 1671-3133(2006)12-0059-03 |
| 修稿时间： | 2006-08-01 |
Treatment of dynamic boundary conditions in the numerical simulation process of sheet forming |
| |
| Sun Guoxiang,Huang Guimei,Zhan Yanran. Treatment of dynamic boundary conditions in the numerical simulation process of sheet forming[J]. Modern Manufacturing Engineering, 2006, 0(12): 59-61 |
| |
| Authors: | Sun Guoxiang Huang Guimei Zhan Yanran |
| |
| Abstract: | In order to treat the dynamic boundary conditions during the process of sheet forming,the die surfaces are dispersed into numbers of triangle elements,and parametric equations are employed to describe the motion states of both the workpiece nodes and the die elements.As a result,the dynamic intersection between workpiece and dies is transformed to that of line and planes.On the basis above,a practical simulation is carried out to investigate the feasibility of these methods. |
| |
| Keywords: | Sheet forming Numerical simulation Dynamic boundary conditions |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
