首页 | 本学科首页   官方微博 | 高级检索  
     

发电厂锅炉短管焊接接头开裂失效分析
引用本文:张绪平,韩伟红,任耀剑.发电厂锅炉短管焊接接头开裂失效分析[J].机械工程材料,2006,30(11):95-98.
作者姓名:张绪平  韩伟红  任耀剑
作者单位:中国矿业大学材料科学与工程学院,江苏,徐州,221008;中国矿业大学材料科学与工程学院,江苏,徐州,221008;中国矿业大学材料科学与工程学院,江苏,徐州,221008
摘    要:某锅炉焊接短管焊接接头在检修时发现泄漏,对焊接接头的开裂原因进行了分析。结果表明:焊接时接头处温度过高,使得热影响区晶粒粗大,焊后冷却速率过大,在焊接处产生了拘束应力,导致在管壁内侧102钢热影响区形成冷裂纹;补焊时引起裂纹内部氧化,从而导致裂纹进一步扩展,最后开裂泄漏。

关 键 词:失效分析  焊接接头  焊接裂纹
文章编号:1000-3738(2006)11-0095-04
收稿时间:2005-11-02
修稿时间:2005-11-022006-01-20

Failure Analysis on the Welded Joint Cracking of Boiler Pipe of Power Plant
ZHANG Xu-ping,HAN Wei-hong,REN Yao-jian.Failure Analysis on the Welded Joint Cracking of Boiler Pipe of Power Plant[J].Materials For Mechanical Engineering,2006,30(11):95-98.
Authors:ZHANG Xu-ping  HAN Wei-hong  REN Yao-jian
Affiliation:China University of Mining and Technology, Xuzhou 221008, China
Abstract:The leaking of nozzle stub of boiler furnace at service was discovered and investigated. The results show that the temperature at welding joint is too high and lead grain become bulky in heat-affected zone. SOme restraint stress and cracks are produced in welding joint for the fast cooling velocity after welding at heat-affected zone in steel 102, subscale is formed at repairing welding and lead the existence crack extended further, nozzle stub leaked at crack finally.
Keywords:failure analysis  welding joint  welding crack
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号