| 基于UG二次开发的直廓环面蜗杆副虚拟加工建模研究 |
| |
| 引用本文： | 吴彬,刘晓婷,李昌冉,张璐,刘丰恕.基于UG二次开发的直廓环面蜗杆副虚拟加工建模研究[J].机床与液压,2019,47(1):131-134. |
| |
| 作者姓名： | 吴彬 刘晓婷 李昌冉 张璐 刘丰恕 |
| |
| 作者单位： | 长安大学道路施工技术与装备教育部重点实验室,陕西西安,710064;长安大学道路施工技术与装备教育部重点实验室,陕西西安,710064;长安大学道路施工技术与装备教育部重点实验室,陕西西安,710064;长安大学道路施工技术与装备教育部重点实验室,陕西西安,710064;长安大学道路施工技术与装备教育部重点实验室,陕西西安,710064 |
| |
| 摘 要： | 针对直廓环面蜗杆副空间齿面的复杂性,利用UG提供的二次开发平台UG/Open完成了直廓环面蜗杆副虚拟加工建模。通过ADAMS软件对模型进行动力学仿真分析,结果表明:蜗杆转速恒定,蜗轮转速与理论值相比相对误差仅为0. 26%,验证了直廓环面蜗杆副模型的正确性。
|
| 关 键 词： | UG二次开发 直廓环面蜗杆副 虚拟样机 动力学仿真分析 |
Virtual Machining Modeling of Straight Profile Worm Gearing Based on UG Secondary Development |
| |
| WU Bin,LIU Xiaoting,LI Changran,ZHANG Lu,LIU Fengshu.Virtual Machining Modeling of Straight Profile Worm Gearing Based on UG Secondary Development[J].Machine Tool & Hydraulics,2019,47(1):131-134. |
| |
| Authors: | WU Bin LIU Xiaoting LI Changran ZHANG Lu LIU Fengshu |
| |
| Affiliation: | (MOE Key Laboratory of Road Construction Technology and Equipment, Chang’an University, Xi’an Shaanxi 710064, China) |
| |
| Abstract: | According to the complexity of the straight profile circular plane worm gear pair' s space tooth surface, the virtual machining modeling of the straight profile worm gearing was completed by using the secondary development platform UG / Open, which was provided by UG. Through ADAMS simulation analysis, the results show that the worm speed is constant, and the relative error of worm wheel speed is only 0.26% compared with the theoretical value, which verifies the correctness of the straight surface enveloping worm gearing model. |
| |
| Keywords: | UG/Open secondary development Straight profile circular plane worm gear pair Virtual prototype Dynamics simu-lation analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
