基于机器视觉的管道焊接跟踪技术研究 |
| |
引用本文: | 甘文龙,罗会信,刘海生,王中任. 基于机器视觉的管道焊接跟踪技术研究[J]. 机床与液压, 2019, 47(4): 103-107 |
| |
作者姓名: | 甘文龙 罗会信 刘海生 王中任 |
| |
作者单位: | 武汉科技大学机械自动化学院,湖北武汉,430081;湖北文理学院机械工程学院,湖北襄阳,441053 |
| |
基金项目: | “机电汽车”湖北省优势特色学科群开放基金(XKQ2017012);中国化学工程第六建设有限公司资助项目(HX2016011) |
| |
摘 要: | 针对爬行焊接机器人在管道自动焊接中对典型的V形坡口焊缝的定位与中心线的提取,设计了一种基于激光视觉检测的自动焊缝跟踪系统。提出了一种基于激光条纹图像特征的两步定位方法:第一步,建立模板匹配,利用模板匹配方式获取激光条纹位置区域;第二步,采用阈值分割和中心法提取激光条纹中心线,然后采用Shi-Tomasi算法对中心线进行角点检测,经过拟合直线求交点和逐列扫描对比得到焊缝坡口的4个拐点信息,并确定焊缝中心。通过对实际的焊接过程进行测试,结果表明:跟踪系统的平均纠偏误差在2像素以内,平均处理纠偏时间在120 ms以内,具有较高的精度和实时性。
|
关 键 词: | 激光视觉系统 焊缝定位 Shi-Tomasi角点检测 位置纠偏 |
Research on Positioning Method of Laser Vision Tracking for Pipeline Welding |
| |
Abstract: | Aiming at the positioning and centerline of typical V groove welds in the automatic welding of the crawler welding robot,an automatic welding seam tracking system based on laser vision detection was designed.A two step positioning method based on the characteristics of laser fringe image was presented.The first step is to establish template matching and use template matching to obtain the laser stripe location.Secondly,the center line of laser stripe was extracted by threshold segmentation algorithm and center value method.Then the Shi-Tomasi algorithm was used to detect the corner points of the center line,and the four inflection points of the weld groove were obtained by fitting the straight line intersection and contrast by scanning column,then the weld center was determined.Through testing the process of real welding tracking,the results show that the average error correction error of the tracking system was within 2 pixels and the average processing time was within 120 ms,which has high accuracy and instantaneity. |
| |
Keywords: | Laser vision detection Welding seam locating Shi-Tomasi corner detection Position rectifying |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|