| 管道环向对接焊接接头超声检测用对比试块的讨论 |
| |
| 引用本文： | 张学成,雷啸,杨龙荣.管道环向对接焊接接头超声检测用对比试块的讨论[J].无损检测,2010(7):516-518,523. |
| |
| 作者姓名： | 张学成 雷啸 杨龙荣 |
| |
| 作者单位： | 四川正吉油气田工程建设检测有限公司,成都610021 |
| |
| 摘 要： | JB／T4730．3—2005标准对环向焊接对接接头超声检测只设计了管道外径在声159mm以下的GS系列对比试块，而对钢管外径≥Ф159mm的管道只提出了对比试块有关要求。在分析了这些要求的基础上，归纳出设计对比试块的3个考虑步骤，并按照单一管道以及多种管道规格超声检测需要和试块系列化需求，提出了对比试块具体设计方案。
|
| 关 键 词： | 超声波检测 对比试块 曲率半径 人工反射体 |
Discussion on Reference Block for Ultrasonic Testing of Circumferential Butt Welding Joint in Tubes |
| |
| ZHANG Xue-Cheng,LEI Xiao,YANG Long-Rong.Discussion on Reference Block for Ultrasonic Testing of Circumferential Butt Welding Joint in Tubes[J].Nondestructive Testing,2010(7):516-518,523. |
| |
| Authors: | ZHANG Xue-Cheng LEI Xiao YANG Long-Rong |
| |
| Affiliation: | (Sichuan Zhengji Testing Co Ltd of Constructing Engineering of Oil and Gas field, Chengdu 610021, China) |
| |
| Abstract: | According to the standard JB/T 4730. 3--2005, reference block of GS series for ultrasonic testing to girth welding joint of tube of diameter below 159 mm, was designed, and for tubes of diameter over 159 mm, only advanced requirements on it, however, was needed. Based on the analysis to these requirements, the design of reference block was concluded to three steps, and a design plan of reference block according to single or many dimensions of tubes and series of reference block in ultrasonic testing was put forward. |
| |
| Keywords: | Ultrasonic testing Reference block Radius of curvature Artificial reflector |
| 本文献已被 维普 等数据库收录！ |
|
