Automated measurement and compensation of thermally induced error maps in machine tools

In this paper, a direct method of machine tool calibration is adopted to model and predict thermally induced errors in machine tools. This method uses a laser ball bar (LBB) as the calibration instrument and is implemented on a two-axis computerized numerical control turning center (CNC). Rather than individually measuring the parametric errors to build the error model of the machine, the total positioning errors at the cutting tool and spindle thermal drifts are rapidly measured using the LBB within the same experimental setup. Unlike conventional approaches, the spindle thermal drifts are derived from the true spindle position and orientation measured by the LBB. A neural network is used to build a machine model in an incremental fashion by correlating the measured errors with temperature gradients of the various heat sources during a regular thermal duty cycle. The machine model developed by the neural network is further tested using random thermal duty cycles. The performance of the system is also evaluated through cutting tests under various thermal conditions. A substantial improvement in the overall accuracy was obtained.