首页 | 本学科首页   官方微博 | 高级检索  
     

ANSYS在接触式电容压力传感器非线性分析中的应用
引用本文:卞剑涛,颜黄苹,冯勇建,王亚强. ANSYS在接触式电容压力传感器非线性分析中的应用[J]. 仪表技术与传感器, 2002, 0(3): 3-6
作者姓名:卞剑涛  颜黄苹  冯勇建  王亚强
作者单位:1. 厦门大学机电工程系,厦门市,361005
2. Department of Electrical Engineering and Computer Science,Case Western Reserve University.Cleveland.OH 44106,USA
摘    要:通过对接触式电容传感器结构原理的分析,运用ANSYS对传感器膜片在外加压力作用下的接触和大变形等非线性问题进行分析,并基于有限元法编写相应的程序,直接得出输出电容与外加压力之间的关系。比较实验结果,验证了ANSYS对接触式电容压力传感器非线性分析的可行性,说明了这一分析方法的实用性。

关 键 词:有限元法 微传感器 ANSYS 接触式电容压力传感器 非线性分析
修稿时间:2001-10-17

Application of ANSYS in the Nonlinearity Analysis of Touch Mode Capacitive Pressure Sensor
Bian Jiantao Yan Huangping Feng Yongjian Dept.of Mechanical and Electrical Engineering,Xiamen University,Xiamen Wang Yaqiang. Application of ANSYS in the Nonlinearity Analysis of Touch Mode Capacitive Pressure Sensor[J]. Instrument Technique and Sensor, 2002, 0(3): 3-6
Authors:Bian Jiantao Yan Huangping Feng Yongjian Dept.of Mechanical  Electrical Engineering  Xiamen University  Xiamen Wang Yaqiang
Affiliation:Bian Jiantao Yan Huangping Feng Yongjian Dept.of Mechanical and Electrical Engineering,Xiamen University,Xiamen 361005 Wang Yaqiang Department of Electrical Engineering and Computer Science,Case Western Reserve University,Cleveland,OH 44106,USA
Abstract:Describes the principle of the touch mode capacitive pressure sensor.Based on the FEA method,provide an ANSYS program,which can analyse some nonlinearity problems such as contact,large deflection and so on when the diaphragm is under pressure load.And the program can be used to get the relationship between capacitance and pressure directly.Compared the measured and other simulation results,the feasibility of the ANSYS applied to analyse the nonlinearity about the touch mode capacitive pressure sensor is validated.And it manifests the practicability of this ANSYS method.
Keywords:Contact  Pressure Sensor  FEA  Nonlinearity  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号