| 基于Pro/E的等螺距供送螺杆计算机辅助设计的研究 |
| |
| 引用本文： | 戈春阳,周一届.基于Pro/E的等螺距供送螺杆计算机辅助设计的研究[J].包装工程,2007,28(7):82-84. |
| |
| 作者姓名： | 戈春阳 周一届 |
| |
| 作者单位： | 江南大学,无锡,214122 |
| |
| 摘 要： | 在分析了等螺距供送螺杆供送圆柱形物体时螺旋槽面形成原理的基础上,建立起了等螺距螺杆径向截面外轮廓曲线数学模型,然后运用Pro/Engineer软件,建立起了参数化的等螺距螺杆的三维实体模型.
|
| 关 键 词： | 等螺距螺杆 参数化 三维实体模型 |
| 文章编号： | 1001-3563（2007）07-0082-03 |
| 修稿时间： | 2007-03-29 |
Study on the CAD of Equal-pitch Delivering Screw based on Pro/E |
| |
| GE Chun-yang,ZHOU Yi-jie.Study on the CAD of Equal-pitch Delivering Screw based on Pro/E[J].Packaging Engineering,2007,28(7):82-84. |
| |
| Authors: | GE Chun-yang ZHOU Yi-jie |
| |
| Affiliation: | Southern Yangtze University, Wuxi 214122, China |
| |
| Abstract: | The mathematical model of the equal pitch screw's radial-section-contour curve was estab- lished on the basis of analyzing the formation of spiral surface while the equal pitch screw delivering the col- umn-shaped objects.The parametric 3-Dimensional model of equal pitch screw was established with Pro/E. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
