| 耦合慢化器结构多方案强度设计 |
| |
| 引用本文： | 杜建红,殷雯. 耦合慢化器结构多方案强度设计[J]. 现代制造工程, 2010, 0(4) |
| |
| 作者姓名： | 杜建红 殷雯 |
| |
| 作者单位： | 1. 苏州市职业大学机电工程系,苏州,215014
2. 中科院物理所中国散裂中子源靶站谱仪工程中心,北京,100190 |
| |
| 基金项目： | 中国科学院知识创新工程重要方向性项目，科技部国际合作重点项目 |
| |
| 摘 要： | 用I-DEAS系统对散裂中子源耦合液氢慢化器在不同结构形式及工艺条件下的强度进行计算。通过对应力分布及变形分析,确定慢化器焊缝位置及止口形式,确定合理的慢化器结构参数。为慢化器结构设计及加工提供依据。
|
| 关 键 词： | 耦合液氢慢化器 结构强度 焊缝位置 |
The strength design of the coupled liquid hydrogen moderator for multi-configuration design |
| |
| DU Jian-hong,YIN Wen. The strength design of the coupled liquid hydrogen moderator for multi-configuration design[J]. Modern Manufacturing Engineering, 2010, 0(4) |
| |
| Authors: | DU Jian-hong YIN Wen |
| |
| Affiliation: | DU Jian-hong1,YIN Wen2 (1 Department of Mechatronic Engineering,Suzhou Vocational University,Suzhou 215014,Jiangsu,China,2 Engineering Center for Target Station , Spectrometers of Chinese Spallation Neutron Source,Institute of Physics,Chinese Academy of Sciences,Beijing 100190,China) |
| |
| Abstract: | Using I-DEAS software calculates the structural strength of the coupled liquid hydrogen moderator under different structural form and process conditions.From the results of the stress distribution and deformation,the suitable position of welding seam and the fix method is designed.The rational structure sizes are given.The result offers the theoretical basis to the structural design and manufacture of the moderator. |
| |
| Keywords: | coupling liquid hydrogen moderator structural strength position of welding seam |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
