| 大模数齿轮磨损后的堆焊修复工艺研究 |
| |
| 引用本文： | 邵潭华 盛听兴. 大模数齿轮磨损后的堆焊修复工艺研究[J]. 热加工工艺, 1995, 0(3): 30-32 |
| |
| 作者姓名： | 邵潭华 盛听兴 |
| |
| 作者单位： | 西安交通大学，山东黄台发电厂 |
| |
| 摘 要： | 通过试板的工艺试验，探索选用适当的焊条、采用适当的焊接工艺和焊后热处理工艺来修复ＺＧ４５钢大模数齿轮磨损齿面的可能性。试验结果表明，联合使用Ｄ１３２＋Ｄ１１２或Ｄ１３２＋Ｊ４２２进行堆焊，均可满足堆焊修复工艺的要求。
|
| 关 键 词： | 堆焊 显微组织 齿轮 |
The Study of Repairing Procedure for the Weared Surface of Large Module Gear |
| |
| Shao Tanhua,Zhou Lixia ,Sheng Tingxing. The Study of Repairing Procedure for the Weared Surface of Large Module Gear[J]. Hot Working Technology, 1995, 0(3): 30-32 |
| |
| Authors: | Shao Tanhua Zhou Lixia Sheng Tingxing |
| |
| Affiliation: | Shao Tanhua;Zhou Lixia ;Sheng Tingxing |
| |
| Abstract: | The repairing procedures for weared surface of ZG45 gear have been investigated by means of selecting proper electrode and welding procedure as well as postweld heat-treatment ,based on technology test of testing Plate. The results show that the requirment for repairing procedure of surfacing can be satisfied by combined use of Electrode D132 and D112 or electrode D132 and J422 . |
| |
| Keywords: | surfacing microstructure heavy gear |
| 本文献已被 CNKI 维普 等数据库收录！ |
