| 基于UG的后置处理和加工仿真技术研究 |
| |
| 引用本文： | 李铁钢.基于UG的后置处理和加工仿真技术研究[J].工具技术,2012,46(8):30-32. |
| |
| 作者姓名： | 李铁钢 |
| |
| 作者单位： | 沈阳工程学院 |
| |
| 摘 要： | 针对典型结构件在DMU50 e机床的数控铣削加工,研究将UG软件的刀位文件生成机床用程序的问题,首先提出了后置处理中重要的机床运动变换和字符转换方法,而后利用C语言编制了数控系统SIEMENS 840D的后置处理程序。最后通过实例仿真加工验证了方法的可行性。
|
| 关 键 词： | 后置处理 刀位文件 UG 加工仿真 |
Research on Postprocessing and Machining Simulation Based on UG |
| |
| Li Tiegang.Research on Postprocessing and Machining Simulation Based on UG[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2012,46(8):30-32. |
| |
| Authors: | Li Tiegang |
| |
| Affiliation: | Li Tiegang Master,Senior Engineer,Dept.of Mechanical Engineering,Shenyang Institute of Engineering,Shenyang 110136,China |
| |
| Abstract: | For the CNC milling of the typical structural part in DMU50 e machine tool,the problem to convert the cutter location source file to machining program is concerned.In this paper,the general kinematics model of machine tool was constructed,the technology of character conversion was proposed and the postprocessor of SIEMENS 840D was programmed by C.At last,the correctness and validity of the method was certified by experiments. |
| |
| Keywords: | postprocessing cutter location source file UG machining simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
