|
|||||
|
|
| 新一代液压滚切剪技术的研究及应用 | |
| 引用本文： | 李远明,冀俊杰,马立峰,马伟然.新一代液压滚切剪技术的研究及应用[J].重型机械,2010(3):8-10. |
| 作者姓名： | 李远明 冀俊杰 马立峰 马伟然 |
| 作者单位： | 1. 酒泉钢铁有限责任公司,甘肃,嘉峪关,735100 2. 中国重型机械研究院有限公司,陕西,西安,710032 3. 太原科技大学材料科学与工程学院,山西,太原,030024 |
| 基金项目： | 新世纪人才支持计划，山西省科技成果推广项目 |
| 摘 要： | 为提高中厚板的剪切质量,降低设备成本,提出了一种PR-8R-PR杆系的剪切机构,该机构将左右两台液压缸与机架铰接,液压缸推动连杆,使其带动机架运动,完成剪切。控制系统采用带检测反馈的双闭环控制,精度高,稳定性好。剪切后切口断面毛刺≤0.5mm,断面垂直度90°±1°,钢板边部瓢曲度≤0.15mm/m。 |
| 关 键 词： | 液压滚剪切机 剪切机理 结构设计 控制系统 |
Research and application of a new hydraulic rolling shear |
|
| LI Yuan-ming,JI Jun-jie,MA Li-feng,MA Wei-ran.Research and application of a new hydraulic rolling shear[J].Heavy Machinery,2010(3):8-10. | |
| Authors: | LI Yuan-ming JI Jun-jie MA Li-feng MA Wei-ran |
| Affiliation: | 1. Jiuquan Iron ＆ Steel Group, Jiayuguan 735100, China; 2. China National Heavy Machinery Research Institute Co. , Ltd. , Xi＇an 710032, China; 3. Taiyuan University of Science and Technology, Taiyuan 030024, China) |
| Abstract: | A shear mechanism of PR -8R- PR bar system has been designed to improve the shearing quality of medium plates and lower the equipment costs. In this mechanism, two hydraulic cylinders both on the left and right are hinged to the frame, and the hydraulic cylinder pushes the rod which drive the frame to complete the shearing work. The control system adopts to the double-loop feedback control which has a high accuracy and good stability. The burr of cut section is no more than 0. 5 mm, the verticality of section is 90° ± 10°, and the curvature of the edge of the scoop plate is no more than 0. 5 mm/m. |
| Keywords: | hydraulic rolling shear shear theory structural design control system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |