| 镶拼型腔的叶轮压铸模 |
| |
| 引用本文： | 李淑玉,田福祥.镶拼型腔的叶轮压铸模[J].特种铸造及有色合金,2011,31(7):632-634. |
| |
| 作者姓名： | 李淑玉 田福祥 |
| |
| 作者单位： | 1. 青岛理工大学汽车与交通学院
2. 青岛理工大学机械工程学院 |
| |
| 摘 要： | 叶轮的叶片薄而多,且呈弧形,成形零件是叶轮压铸模设计和加工的难点。设计给出的叶轮压铸模结构。成形铸件10个叶片的型腔由5个定模镶件和5个定模镶件镶拼而成,既便于模具制造,又便于在镶件配合面上设置排气槽。模具结构紧凑,工作可靠,操作方便。
|
| 关 键 词： | 叶轮 成形零件 镶件 压铸模 |
Die casting Die with Inlaid Cavity for Impeller |
| |
| Li Shuyu,Tian Fuxiang.Die casting Die with Inlaid Cavity for Impeller[J].Special Casting & Nonferrous Alloys,2011,31(7):632-634. |
| |
| Authors: | Li Shuyu Tian Fuxiang |
| |
| Affiliation: | Li Shuyu1,Tian Fuxiang2 (1. School of Automobile and Traffic,Qingdao Technological University,2. School of Mechanical Engineering,Qingdao Technological University) |
| |
| Abstract: | Due to the impeller with many thin blades and the arc shaped, the difficulty point of design and working is the part formation in die casting mould. Design structure of die casting mould was presented, and production ways for part formation were described. Cavity of ten blades in forming parts was designed with inlaying five fixed inserts and five moving inserts, which was not only beneficial for mould making, but also beneficial for setting exhausting slot. The mould exhibits the feature of compact structu... |
| |
| Keywords: | Impeller Forming Parts Insert Die Casting Die |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
