Crevice corrosion initiation and propagation on Alloy-22 under galvanically-coupled and galvanostatic conditions

The initiation and propagation of crevice corrosion on the Ni–Cr–Mo Alloy-22 has been studied in concentrated chloride solutions under galvanically-coupled and galvanostatic conditions. Under galvanically-coupled natural corrosion conditions crevice corrosion initiated but propagation was limited by repassivation. This was attributed to the slow kinetics of oxygen reduction on passive surfaces external to the crevice. Under galvanostatic conditions a potential more positive than 200 mV_Ag/AgCl and an applied current greater than 5 μA were required to stabilize propagation. A minimum critical current density to establish active sites within the crevice was estimated to be around 250 μA cm⁻².