| 固态及半固态LY11合金加工图 |
| |
| 引用本文： | 余小鲁,冒国兵.固态及半固态LY11合金加工图[J].特种铸造及有色合金,2011,31(7):623-625. |
| |
| 作者姓名： | 余小鲁 冒国兵 |
| |
| 作者单位： | 安徽工程大学安徽省高性能有色金属材料重点实验室 |
| |
| 基金项目： | 安徽省高等学校省级自然科学基金研究项目( KJ2009B134); 安徽工程大学科研启动基金项目(2008YQ007);安徽工程大学青年基金项目(2007YQ008zd) |
| |
| 摘 要： | 根据动态材料模型,建立了固态及半固态LY11合金的加工图。利用加工图确定了试验材料热变形的流变失稳区。结果表明,半固态成形时的流变失稳区范围大于固态成形时的失稳区范围,且与应变速率有关。此外,获得了等温压缩试验参数范围内的热变形最佳工艺参数。半固态加工最佳工艺参数是加热温度为560℃,应变速率为0.0010s-1,固态加工最佳工艺参数是加热温度为400℃,应变速率为0.0010s-1。
|
| 关 键 词： | LY11合金 半固态 加工图 工艺参数 |
Processing Maps of Solid and Semi-solid LY11 Alloy |
| |
| Yu Xiaolu,Mao Guobing.Processing Maps of Solid and Semi-solid LY11 Alloy[J].Special Casting & Nonferrous Alloys,2011,31(7):623-625. |
| |
| Authors: | Yu Xiaolu Mao Guobing |
| |
| Affiliation: | Yu Xiaolu,Mao Guobing (Anhui Key Laboratory of High Performance Non-ferrous Metal Materials,Anhui Polytechnic University) |
| |
| Abstract: | Based on the dynamic material model, the processing maps of LY11 alloy in the solid state and in semi-solid state were established. The instability zones of flow behavior were recognized by the maps. The results show that the instability zone during semi-solid forming process is more sensitive to strain rate than that of solid forming process. In addition, optimized processing parameters in the temperature range and different strain rates were presented by the maps. The optimized parameters are as follows: ... |
| |
| Keywords: | LY11 Alloy Semi-solid Processing Maps Processing Parameters |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
