| 马钢4000m^3高炉高Al2O3炉渣渣系优化实验研究 |
| |
| 引用本文： | 宋亚超,王平,李家新,孙乐飞.马钢4000m^3高炉高Al2O3炉渣渣系优化实验研究[J].安徽工业大学学报,2009,26(4):327-332. |
| |
| 作者姓名： | 宋亚超 王平 李家新 孙乐飞 |
| |
| 作者单位： | 安徽工业大学,冶金与资源学院,安徽,马鞍山,243002 |
| |
| 摘 要： | 以马钢现场高炉渣样为基准，研究w（Al2O3）=15％～20％的高炉炉渣性能。结果表明，在目前的冶炼条件下，马钢第三炼铁厂炉渣中的w（Al2O3）不宜超过18％，w（MgO）不宜超过12％。在高温区，MgO对炉渣性能的影响大于Al2O3，低温区相反，并提出了合理的渣系组成。
|
| 关 键 词： | 高炉 炉渣 粘度 熔化性温度 |
Experimental Study on Slag Optimization of 4000 m~3 BF with Al_2O_3-rich Slag in Masteel |
| |
| SONG Ya-chao,WANG Ping,LI Jia-xin,SUN Le-fei.Experimental Study on Slag Optimization of 4000 m~3 BF with Al_2O_3-rich Slag in Masteel[J].Journal of Anhui University of Technology,2009,26(4):327-332. |
| |
| Authors: | SONG Ya-chao WANG Ping LI Jia-xin SUN Le-fei |
| |
| Affiliation: | School of Metallurgy & Resources;Anhui University of Technology;Ma'anshan 243002;China |
| |
| Abstract: | The test is based on Masteel BF slag as a basic slag, the performance of blast furnace slag of w（Al2O3）=15%-20% was researched. The results show that under the current smelting condition, w（Al2O3） should not be more than 18% and w（Al2O3） should not be more than 12% in the third Iron works of Masteel.The impact of MgO on blast furnace slag performance is more than Al2O3 in the high temperature region, but opposites in low temperature region. A reasonable composition of slag was made. |
| |
| Keywords: | blast furnace slag viscosity melting temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
