首页 | 本学科首页   官方微博 | 高级检索  
     

橡胶型氯化聚乙烯结构研究
引用本文:易红玲,郝梦轩,刘毓真.橡胶型氯化聚乙烯结构研究[J].橡胶工业,2004,51(12):713-717.
作者姓名:易红玲  郝梦轩  刘毓真
作者单位:青岛科技大学,高分子科学与工程学院,山东,青岛,266042
摘    要:研究橡胶型氯化聚乙烯(CPE)的氯分布、相对分子质量及其分布、残余结晶度及流变性能。结果表明,橡胶型CPE的氯原子主要以单取代的形式存在于分子链上;4种橡胶型CPE的-↑Mw由大到小顺序为CPE6335,CPE6135,CPE6235,CPEl40B,-↑Mw越大,CPE的门尼粘度越小;橡胶型CPE的氯含量越大、氯原子分布越均匀,其残余结晶度越小;橡胶型CPE熔体为剪切变稀流体。

关 键 词:氯化聚乙烯  氯分布  相对分子质量  残余结晶度  流变性能
文章编号:1000-890X(2004)12-0713-05
修稿时间:2004年6月17日

Structure of CPE rubber
YI Hong-ling,HAO Meng-xuan and LIU Yu-zhen.Structure of CPE rubber[J].China Rubber Industry,2004,51(12):713-717.
Authors:YI Hong-ling  HAO Meng-xuan and LIU Yu-zhen
Affiliation:Qingdao University of Science and Technology,Qingdao University of Science and Technology and Qingdao University of Science and Technology
Abstract:The chlorine distribution,molecular weight and its distribution,residule crystallinity and rheological properties of different CPE rubbers were investigated by C-NMR,GPC and DSC.The results showed that the chlorine atom was attached to the molecular chain in single substituted way;the order of (M)_w for 4 different CPE rubbers was as follows:CPE6335>CPE6135>CPE6235>CPE140B,and the higher the (M)_w,the lower the Mooney viscosity of CPE rubber;the higher chlorine content and more uniform distribution of chlorine atom in CPE rubber,the lower residule crystallinity;and CPE rubber melt was a shear thinning fluid.
Keywords:CPE  chlorine distribution  molecular weight  residule crystallinity  rheological properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《橡胶工业》浏览原始摘要信息
点击此处可从《橡胶工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号