| 多齿差摆线齿轮泵基本参数的优化设计 |
| |
| 引用本文： | 徐学忠.多齿差摆线齿轮泵基本参数的优化设计[J].机床与液压,2005(3):88-90. |
| |
| 作者姓名： | 徐学忠 |
| |
| 作者单位： | 常熟理工学院机电工程系,江苏常熟,215500 |
| |
| 摘 要： | 多齿差摆线齿轮泵基本参数的选择要满足各种限制条件。本文以单位体积排量最大作为目标函数，以啮合角、重合度及齿廓不产生重迭干涉等为约束条件，建立了多齿差摆线齿轮泵的优化设计数学模型，并对两种常用齿数组的多齿差摆线齿轮泵基本参数进行了优化设计。所得结果可以和不同的齿数与中心距进行组合应用，得到不同流量的产品系列。。
|
| 关 键 词： | 多齿差摆线泵 优化设计 基本参数 排量 啮合角 |
| 文章编号： | 1001-3881(2005)3-088-3 |
| 修稿时间： | 2004年1月8日 |
Optimization Design of Basic Parameter in Cycloidal Pump with Multi-tooth Number Difference |
| |
| XU Xue-zhong.Optimization Design of Basic Parameter in Cycloidal Pump with Multi-tooth Number Difference[J].Machine Tool & Hydraulics,2005(3):88-90. |
| |
| Authors: | XU Xue-zhong |
| |
| Abstract: | The problem of optimizing basic parameter of cycloidal pump with multi-tooth number difference was considered.The optimization mathematical model was set up by considering the maximum flow per volume of the pump as its objective function,the meshing angle,contact ratio and other dimensions constrained as constrain condition.By utilizing the results and the different tooth number combination and different center distance of rotors,a serial of products with different flow ratio can be designed. |
| |
| Keywords: | Cycloidal pump with multi-tooth number Optimum design Basic parameter Flow Meshing angle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
