木材表面化学镀镍工艺的研究 |
| |
引用本文: | 李萌.木材表面化学镀镍工艺的研究[J].中国材料科技与设备,2012(6):56-58. |
| |
作者姓名: | 李萌 |
| |
作者单位: | 曲阜师范大学化学与化工学院,山东曲阜273165 |
| |
摘 要: | 实验研究了普通木材表面化学镀镍的操作方法、工艺条件,讨论了各种操作因素对镀层质量的影响,试验了化学镀层与镀件基体的结合力,确定了化学镀镍的工艺流程和工艺条件。实验结果表明,木材经过预处理及敏化、活化处理后,化学镀镍溶液的pH值控制在8.0,镀镍温度控制在65℃,反应时间40min,木材表面可以得到较好的化学镀层。
|
关 键 词: | 木材 化学镀 还原剂 |
Electroless Nickel Plating on the Surface of Poplar wood |
| |
Affiliation: | L I Meng (Institute of Chemistry and Technology of Qufu Normal University, Shandong, Qufu, 273165, China) |
| |
Abstract: | The operating methods, the process and the influence of several factors on nickel--plating on the surface of ordi- nary poplar wood were studied, then it is tested the combination strength between chemical coating and poplar wood, and de- termined the process and the optimum conditions finally. The quality of electroless nickel--plating was good, when the poplar wood were pretreated, and sensitized, and activated, the pH=8. 5, the reaction temperature was 65℃ and the reaction time |
| |
Keywords: | Poplar wood Electroless plating Reducing agent |
本文献已被 维普 等数据库收录! |
|