|
|||||
|
|
| 基于Pro/E的减速器三维建模与运动仿真 | |
| 引用本文： | 严明,肖靖凯,刘光亚. 基于Pro/E的减速器三维建模与运动仿真[J]. 煤矿机械, 2011, 32(1): 217-218 |
| 作者姓名： | 严明 肖靖凯 刘光亚 |
| 作者单位： | 1. 湖北工业大学机械学院,武汉,430068 2. 北京莱伯泰科仪器有限公司,北京,101312 3. 湖北工业大学电气学院,武汉,430068 |
| 基金项目： | 国家自然科学基金资助项目(30840032); 湖北工业大学校博士启动基金资助项目(BSQD0903) |
| 摘 要： | 利用Pro/E对二级圆柱齿轮减速器的各零件进行三维实体建模,对减速器整机进行虚拟装配,并进行了运动仿真。该设计方法可以在物理样机制造前发现设计中存在的不足,便于产品进行改进和优化,能够大大提高产品的开发效率,节约产品的开发成本。 |
| 关 键 词： | 减速器 三维建模 运动仿真 |
3D Modeling and Motion Simulation of Reducer Based on Pro/E |
|
| YAN Ming-xia,XIAO Jing-kai,LIU Guang-ya. 3D Modeling and Motion Simulation of Reducer Based on Pro/E[J]. Coal Mine Machinery, 2011, 32(1): 217-218 | |
| Authors: | YAN Ming-xia XIAO Jing-kai LIU Guang-ya |
| Affiliation: | YAN Ming-xia1,XIAO Jing-kai2,LIU Guang-ya3(1.Mechanical Engineering College,Hubei University of Technology,Wuhan 430068,China,2.Labtech Group,Beijing 101312,3.Electronic Engineering College,China) |
| Abstract: | 3D modeling,virtual assembly and motion simulation of a reducer were completed with Pro/E.During vitual design,faults of a reducer can be found out prior to be made,which is helpful to optimize it.And further,it can improve design efficiency greatly and save development cost. |
| Keywords: | reducer 3D modeling motion simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |