| 带式输送机驱动装置虚拟样机研究 |
| |
| 引用本文： | 胡坤,王鹏彧,郭永存. 带式输送机驱动装置虚拟样机研究[J]. 煤矿机械, 2011, 32(1): 77-79 |
| |
| 作者姓名： | 胡坤 王鹏彧 郭永存 |
| |
| 作者单位： | 安徽理工大学机械工程学院,安徽淮南,232001 |
| |
| 基金项目： | 安徽省科技攻关项目(08010202136); 安徽省高校自然科学研究重点项目(kj2008A075); 安徽省高校省级优秀青年人才基金项目(2009SQRZ061ZD) |
| |
| 摘 要： | 将虚拟样机技术应用于带式输送机驱动装置设计,利用RecurDyn软件的GEAR模块和BELT模块建立驱动装置虚拟样机,并与输送带联合仿真。仿真结果表明虚拟样机运行与带式输送机运行规律相符合,验证了带式输送机驱动装置虚拟样机的正确性。
|
| 关 键 词： | 带式输送机 驱动装置 虚拟样机 RecurDyn 仿真 |
Research on Virtual Prototyping of Belt Conveyor Driving Device |
| |
| HU Kun,WANG Peng-yu,GUO Yong-cun. Research on Virtual Prototyping of Belt Conveyor Driving Device[J]. Coal Mine Machinery, 2011, 32(1): 77-79 |
| |
| Authors: | HU Kun WANG Peng-yu GUO Yong-cun |
| |
| Affiliation: | HU Kun,WANG Peng-yu,GUO Yong-cun (Anhui University of Science and Technology,Huainan 232001,China) |
| |
| Abstract: | Virtual prototyping(VP) technology was applied to design method of belt conveyor driving device.The driving device VP was established by GEAR and BELT module in RecurDyn.The VP and the conveyor belt system were linked to run the joint simulation in virtual environment.In conclusion,the simulation results are in accord with the real working state of the belt conveyor,and show the correctness of the driving device VP. |
| |
| Keywords: | belt conveyor driving device virtual prototyping RecurDyn simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
