| BT25Y钛合金拉伸强度的当量计算 |
| |
| 引用本文： | 杨卫国,王青江,张彩碚,刘羽寅. BT25Y钛合金拉伸强度的当量计算[J]. 金属学报, 2004, 40(2): 155-158 |
| |
| 作者姓名： | 杨卫国 王青江 张彩碚 刘羽寅 |
| |
| 作者单位： | 东北大学理学院,沈阳,110006;中国科学院金属研究所,沈阳,110016 |
| |
| 摘 要： | 测试了BT25Y钛合金中不同Al，W．Mo含量双态组织的室温和高温拉伸强度，在此基础上，参照Kolachev等人的公式，给出了高温条件下抗拉强度和屈服强度的当量计算公式．该公式也适用于魏氏组织BT25Y钛合金。
|
| 关 键 词： | BT25Y 钛台金 强度 当量公式 |
| 文章编号： | 0412-1961(2004)02-0155-04 |
| 收稿时间： | 2003-02-24 |
| 修稿时间： | 2003-05-07 |
Evaluation of Tensile Strength of BT25Y Titanium Alloy in Terms of Equivalents |
| |
| YANG Weiguo ),WANG Qingjiang ),ZHANG Caibei ),LIU Yuyin ). Evaluation of Tensile Strength of BT25Y Titanium Alloy in Terms of Equivalents[J]. Acta Metallurgica Sinica, 2004, 40(2): 155-158 |
| |
| Authors: | YANG Weiguo ) WANG Qingjiang ) ZHANG Caibei ) LIU Yuyin ) |
| |
| Affiliation: | 1) Science Department, Northeastern University, Shenyang 110006; 2) Institute of Metal Research, The Chinese Academy of Sciences,Shenyang 110016 |
| |
| Abstract: | The tensile strengths of the duplex microstructural BT25Y titanium alloys with different contents of Al, W, and Mo have been measured at room and high temperatures. According to Kolachev' formula, the equivalent formulae of yield strength and ultimate tensile strength were derived with the experimental results. The calculated strengths from these equivalent formulae also accord with the experimental values of BT25Y titanium alloys with widmanstatten microstructure at variant temperatures. |
| |
| Keywords: | BT25Y titanium alloy strength equivalent formula |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《金属学报》浏览原始摘要信息 |
|
点击此处可从《金属学报》下载全文 |
