| 热成形凸模的缺陷分析及对策 |
| |
| 引用本文： | 张春侠,彭引平. 热成形凸模的缺陷分析及对策[J]. 模具技术, 2006, 0(2): 61-63 |
| |
| 作者姓名： | 张春侠 彭引平 |
| |
| 作者单位： | 1. 陕西科技大学,机电工程学院,陕西,咸阳,712081
2. 彩虹集团公司,陕西,咸阳,712021 |
| |
| 摘 要： | 以玻璃制件的热成形凸模为例，说明热成形凸模的主要缺陷：凸模裂纹和凸模伤。针对不同的种类进行理化分析和抽样检查，探宄原因，提出对策方案，以提高产品质量和模具寿命。
|
| 关 键 词： | 凸模 凸模裂纹 凸模伤 对策 |
| 文章编号： | 1001-4934（2006）02-0061-03 |
| 收稿时间： | 2005-11-07 |
| 修稿时间： | 2005-11-07 |
Defect Analysis and Its Solution of Hot-forming Punch |
| |
| ZHANG Chun-xia,PENG Yin-ping. Defect Analysis and Its Solution of Hot-forming Punch[J]. Die and Mould Technology, 2006, 0(2): 61-63 |
| |
| Authors: | ZHANG Chun-xia PENG Yin-ping |
| |
| Abstract: | Taken the hot-forming punch of a glass part as an example, the main defects of hotforming punch is explained, including punch crack and punch wound, In term of different types physical and chemical analysis and sample inspection are proceeded to explore their causes. Its solution is put forward to increase product quality and die longevity. |
| |
| Keywords: | punch punch crack punch wound solution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
