| 轿车后背门内板冲压工艺及模具设计 |
| |
| 引用本文： | 万志远,陈银平.轿车后背门内板冲压工艺及模具设计[J].制造技术与机床,2020(2):164-166. |
| |
| 作者姓名： | 万志远 陈银平 |
| |
| 作者单位： | 山东华宇工学院;德州亚太集团 |
| |
| 摘 要： | 轿车后背门内板是轿车车身中典型的零件。根据零件冲压工艺性,设计了工件成形的5个工序,分别为:落料-拉深成形-修边冲孔-修边冲孔-翻边修边整形冲孔。根据工艺设计内容,利用UG和AutoCAD软件,设计了后背门内板冲压成形的五套模具。根据设计的模具尺寸进行加工制造,通过模具的实验预压得到轿车后背门内板的冲压零件。根据零件是否合格验证工序的合理性和模具设计的可靠性。
|
| 关 键 词： | 后背门内板 冲压工艺 模具设计 |
Stamping process and die design of the back door inner panel of car |
| |
| WAN Zhiyuan,CHEN Yinping.Stamping process and die design of the back door inner panel of car[J].Manufacturing Technology & Machine Tool,2020(2):164-166. |
| |
| Authors: | WAN Zhiyuan CHEN Yinping |
| |
| Affiliation: | (The Academy of Mechanical Engineering,Shandong Huayu University of Technology,Dezhou 253034,CHN;Dezhou Yatai Group,Dezhou 253000,CHN) |
| |
| Abstract: | The back door inner panel of car is a typical part of the car body.According to the stamping processability of the parts,five forming steps of the parts are designed,namely:blanking-draw forming-trimming punching-trimming punching-flanging trimming forming punching.According to the process design content,using UG and AutoCAD software,five sets of molds for stamping and forming The back door inner panel of car are designed.According to the designed mold size,the stamping parts of the back door inner panel of car are obtained.According to whether the parts are qualified or not,the reliability of the process and the reliability of the mold design are verified. |
| |
| Keywords: | back door inner panel stamping process mold design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
