| 基于ANSYS Workbench砌块成型机布料箱结构分析与优化设计 |
| |
| 引用本文： | 王丙,郑丝柳.基于ANSYS Workbench砌块成型机布料箱结构分析与优化设计[J].机械与电子,2016,0(9):22-26. |
| |
| 作者姓名： | 王丙 郑丝柳 |
| |
| 作者单位： | （1.江苏科技大学张家港校区 机电与汽车工程学院，江苏 张家港 215600；2.徐州工程学院化学化工学院，江苏 徐州 221018） |
| |
| 摘 要： | 通过案例对比法，建立了布料箱的三维模型，在ANSYS Workbench中进行静力学分析，得到了布料箱总体、前侧面、后侧面的应力云图和变形云图。以结构尺寸最小为设计目标建立优化数学模型，利用内点惩罚函数法在MATLAB中求解，并将优化后的模型重新建模。结果表明，布料箱在满足变形和应力条件下，结构尺寸有所变化，总体积减小。
|
| 关 键 词： | 布料箱 ANSYS Workbench 静力学分析 优化设计 |
Analysis and Optimized Design of Distributing Box Structure of Block Forming Machine
Based on ANSYS Workbench |
| |
| WANG Bing,ZHENG Siliu.Analysis and Optimized Design of Distributing Box Structure of Block Forming Machine
Based on ANSYS Workbench[J].Machinery & Electronics,2016,0(9):22-26. |
| |
| Authors: | WANG Bing ZHENG Siliu |
| |
| Affiliation: | (1.School of Mechatronic and Automobile Engineering，Jiangsu University of Science and Technology, Zhangjiagang 215600，China；2. College of Chemistry and Chemical Engineering，Xuzhou Institute of Technology, Xuzhou 221018,China) |
| |
| Abstract: | In this paper, the three-dimensional model of the distribution box is established by the case comparison method, and the stress and deformation cloud images of the whole, front and back sides of the material box are obtained by static analysis in ANSYS Workbench. Taking the minimum structure size as the design objective, the mathematical model is established and the interior point penalty function method is used to solve the MATLAB. And the optimized model is remodeled. The results show that the structure size of the material box under the condition of deformation and stress is changed, and the total volume decreases. |
| |
| Keywords: | cloth box ANSYS workbench static analysis optimization design |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《机械与电子》浏览原始摘要信息 |
|
点击此处可从《机械与电子》下载全文 |
