| Abstract: | Thin film composites (TFCs) as forward osmosis (FO) membranes for seawater desalination application were prepared. For this purpose, polyacrylonitrile (PAN) as a moderately hydrophilic polymer was used to fabricate support membranes via nonsolvent‐induced phase inversion. A selective thin polyamide (PA) film was then formed on the top of PAN membranes via interfacial polymerization reaction of m‐phenylenediamine and trimesoyl chloride (TMC). The effects of PAN solution concentration, solvent mixture, and coagulation bath temperature on the morphology, water permeability, and FO performance of the membranes and composites were studied. Support membranes based on low PAN concentrations (7 wt %), NMP as solvent and low coagulation bath temperature (0 °C) demonstrated lower thickness, thinner skin layer, more porosity, and higher water permeability. Meanwhile, decreasing the PAN solution concentration lead to higher water permeance and flux and lower reverse salt flux, structural parameter, and tortuosity for the final TFCs. Composites made in N,N‐dimethylformamide presented lower permeance and flux for water and salt and higher salt rejection, structural parameter, and tortuosity. FO assay of the composites showed lower water permeance values in saline medium comparing to pure water. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44130. |
