首页 | 本学科首页   官方微博 | 高级检索  
     

车体双轴倾角传感器的标定
引用本文:贾培刚,张铭.车体双轴倾角传感器的标定[J].西安工业大学学报,2012,32(12):1000-1003.
作者姓名:贾培刚  张铭
作者单位:西安工业大学机电工程学院,西安,710021
摘    要:为了消除由双轴倾角传感器基准面加工误差、电子元器件的焊接误差、电路板的安装误差和标定过程不规范所带来的传感单元敏感轴与标定平台的旋转轴之间的平行误差,在MEMS倾角传感器的测量原理基础上,分析了双轴倾角传感器标定过程中误差的来源并建立了标定误差的数学模型.根据该误差模型对测量数据进行了模拟,分析模拟结果并提出了有效的软件实时修正的标定方法,弥补了传统标定方法的不足.对采取该修正方法前后的数据进行比较,实验结果表明传感器输出数据误差减小了1个数量级以上.文中方法可明显提高双轴倾角传感器的标定精度.

关 键 词:倾角传感器  测量误差  实时修正  标定

Calibration of a Dual Axis Inclinometer for Hull Attitude
Authors:JIA Pei-gang  ZHANG Ming
Affiliation:(School of Mechatronic Engineering, Xi' an Technological University, Xi ' an 710021, China)
Abstract:In order to eliminate the parallelism error between sensitive axis of sensing unit and slewing axis of the calibration platform caused by machining error of reference plane, welding error of electronic components, alignment error of PCB and lack of standardization in calibration process, the sources of calibration errors are analyzed and the mathematical model is established based on the measurement principle of MEMS inclinometer. The measured data is simulated according to this error model, an effective real-time correcting calibration method is finally put forward by analyzing simulation result, which can supplement the conventional approaches. Compared the data before and after taking this method, test results show that error of data from inclinometer is decreased by more than one order of magnitude. The proposed method can improve calibration accuracy of dual-axis inclinometer obviously.
Keywords:inclinometer  measurement error  real-time correction  calibration
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号