首页 | 本学科首页   官方微博 | 高级检索  
     

新型直接碳燃料电池阴极材料及其性能
引用本文:赵立,朱庆山. 新型直接碳燃料电池阴极材料及其性能[J]. 过程工程学报, 2006, 6(5): 822-826
作者姓名:赵立  朱庆山
作者单位:中国科学院过程工程研究所多相反应开放研究实验室,北京,100080;中国科学院研究生院,北京,100049;中国科学院过程工程研究所多相反应开放研究实验室,北京,100080
摘    要:考察了Ni-CeO2复合阴极对直接碳燃料电池(DCFC)输出性能的影响. 使用不同组成的Ni-CeO2复合阴极对DCFC性能进行了测试. 结果表明,使用Ni-CeO2复合阴极可显著提高DCFC在500和630℃工作时的电流密度、功率密度和燃料转化效率,500℃下DCFC最大电流密度、功率密度分别为328 mA/cm2和72 mW/cm2. 630℃下DCFC最大电流密度、功率密度分别为474 mA/cm2和108 mW/cm2,电流密度50 mA/cm2时燃料转化效率为70%. 用XRD和SEM对Ni-CeO2复合阴极材料进行了表征,并对Ni-CeO2复合阴极可能的作用机制进行了研究.

关 键 词:直接碳燃料电池  功率密度  电流密度  阴极  CeO2
文章编号:1009-606X(2006)05-0822-05
收稿时间:2005-11-10
修稿时间:2005-12-14

Novel Cathode Material for Direct Carbon Fuel Cell
ZHAO Li,ZHU Qing-shan. Novel Cathode Material for Direct Carbon Fuel Cell[J]. Chinese Journal of Process Engineering, 2006, 6(5): 822-826
Authors:ZHAO Li  ZHU Qing-shan
Affiliation:Multiphase Reaction Laboratory, Institute of Process Engineering, Chinese Academy of SciencesMultiphase Reaction Laboratory, Institute of Process Engineering, Chinese Academy of Sciences
Abstract:The effect of Ni-CeO2 cathodes on the performance of direct carbon fuel cell (DCFC) was studied. The performances of DCFC with different Ni-CeO2 cathodes generating relatively high current density and power density were reported. The results showed that DCFC using the Ni-CeO2 cathode produced the maximum current and power densities of 474 mA/cm2 and 108 mW/cm2 at 630℃, respectively, the fuel conversion efficiency was 70% at the current density of 50 mA/cm2. The DCFC using Ni-CeO2 cathode produced the maximum current and power densities of 328 mA/cm2 and 72 mW/cm2 at 500℃, respectively. XRD and SEM were employed in the cathode characterization. Some features of the cathodes which might greatly contribute to the increase in DCFC performance were discussed.
Keywords:direct carbon fuel cell   power density   current density   cathode   CeO2
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《过程工程学报》浏览原始摘要信息
点击此处可从《过程工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号