Evaluation of different approaches for improving the cycle life of MgNi-based electrodes for Ni-MH batteries |
| |
| Affiliation: | 1. CNR-ISC, U.O.S. La Sapienza, Piazzale A. Moro 5, 00185 Roma, Italy;2. Dipartimento di Scienze, Univ. Basilicata, V.le Ateneo Lucano, 10, 85100 Potenza, Italy;3. Dipartimento di Chimica, Sapienza Univ. Roma, P.le A. Moro 5, 00185 Roma, Italy;4. ENEA – Centro Ricerche Casaccia,via Anguillarese 301, 00100 Roma, Italy;1. Energy Material Lab, Material Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., LTD, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea;2. Analytical Science Group, Samsung Advanced Institute of Technology, Samsung Electronics Co., LTD, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea;3. Department of Civil and Environmental Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea;1. G.N. Khalsa College, Matunga, Mumbai 400019, India;2. Department of Physics, S.G.B. Amravati University, Amravati, India;3. Department of Physics, R.T.M. Nagpur University, Nagpur 440010, India;1. Division of Radiochemistry and Engineering, Shanghai Institute of Applied Physics (SINAP), Chinese Academy of Sciences (CAS), Shanghai 201800, China;2. Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Chinese Academy of Sciences, Shanghai 201800, China |
| |
| Abstract: | Several methods have been investigated to enhance the cycle life of amorphous MgNi used as the negative electrode for Ni-MH batteries. The first approach involves modifying its surface composition in different ways, including the electroless deposition of a chromate conversion coating, the addition of chromate salt or NaF into the electrolyte and the mechanical coating of the particles with various compounds (e.g. TiO2). Another approach consists of developing (MgNi + AB5) composite materials. However, the cycle life of these modified MgNi electrodes remains unsatisfactory. On the other hand, the modification of the bulk composition of the MgNi alloy with elements such as Ti and Al appears to be more effective. For instance, a Mg0.9Ti0.1NiAl0.05 electrode retains 67% of its initial discharge capacity (404 mAh g?1) after 15 cycles compared to 29% for MgNi. The charging conditions also have a great influence on the electrode cycle life as demonstrated by the existence of a charge input threshold below which minor capacity decay occurs. In addition, the particle size has a major influence on the electrode performance. We have developed an optimized electrode constituted of Mg0.9Ti0.1NiAl0.05 particles with the appropriate size (>150 μm) showing a capacity decay rate as low as ～0.2% per cycle when charged at 300 mAh g?1. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
