首页 | 本学科首页   官方微博 | 高级检索  
     

基于红外同步的收发分离超声测距系统的研究
引用本文:张 强,徐 霞,高 颂,徐玮巍,孙晨晨,徐寅林. 基于红外同步的收发分离超声测距系统的研究[J]. 南京师范大学学报, 2017, 0(2). DOI: 10.3969/j.issn.1672-1292.2017.02.004
作者姓名:张 强  徐 霞  高 颂  徐玮巍  孙晨晨  徐寅林
作者单位:南京师范大学物理科学与技术学院,江苏 南京 210023
摘    要:传统的超声测距是基于测量超声反射回波所耗费时间的方法而进行的,该方法无法实现两个分离点目标距离的测定. 本文设计了一种利用红外同步信号控制两个分离点目标的测距系统. 文中阐述了该方法的实现原理,给出了收发分离超声测距系统的电路设计,分析了收、发两端超声波传播过程中产生的时间误差来源,并修正了超声波测距公式,以提高测量精度. 该系统电路实现简单,测距精度可达到1.5 mm左右,具有很好的实际应用价值.

关 键 词:超声波  红外同步  测距

Research on Separation of Transceiver of Ultrasonic DistanceMeasuring System Based on the Infrared Synchronization
Zhang Qiang,Xu Xia,Gao Song,Xu Weiwei,Sun Chenchen,Xu Yinlin. Research on Separation of Transceiver of Ultrasonic DistanceMeasuring System Based on the Infrared Synchronization[J]. Journal of Nanjing Nor Univ: Eng and Technol, 2017, 0(2). DOI: 10.3969/j.issn.1672-1292.2017.02.004
Authors:Zhang Qiang  Xu Xia  Gao Song  Xu Weiwei  Sun Chenchen  Xu Yinlin
Affiliation:School of Physical Science and Technology,Nanjing Normal University,Nanjing 210023,China
Abstract:Traditional ultrasonic ranging is based on the method of ultrasonic echo delay. This method cannot achieve two separated points for ranging. The paper designs a distance-detecting system by using an infrared synchronization signal to control two separated targets. The paper illustrates in detail the principle of the method and this circuit design of ultrasonic ranging system is given. It also analyzes the delay error of two separated points and correct the ultrasonic ranging formula,improving the accuracy of measurement. The circuit is easy to implement and the ranging accuracy is 1.5 mm. So the system has a high practical value.
Keywords:ultrasonic  infrared synchronization  measuring distance
本文献已被 CNKI 等数据库收录!
点击此处可从《南京师范大学学报》浏览原始摘要信息
点击此处可从《南京师范大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号