首页 | 本学科首页   官方微博 | 高级检索  
     

消偏振二维二元闪耀光栅设计
引用本文:朱嘉诚,周建康,沈为民.消偏振二维二元闪耀光栅设计[J].红外与毫米波学报,2020,39(2):149-156.
作者姓名:朱嘉诚  周建康  沈为民
作者单位:苏州大学光电科学与工程学院,江苏苏州 215006;苏州大学教育部现代光学技术重点实验室,江苏省先进光学制造技术重点实验室,江苏苏州 215006;苏州大学光电科学与工程学院,江苏苏州 215006;苏州大学教育部现代光学技术重点实验室,江苏省先进光学制造技术重点实验室,江苏苏州 215006;苏州大学光电科学与工程学院,江苏苏州 215006;苏州大学教育部现代光学技术重点实验室,江苏省先进光学制造技术重点实验室,江苏苏州 215006
基金项目:Supported by the National Key Research and Development Program of China
摘    要:为减小成像光谱仪的偏振敏感度并提高其定量化探测精度,提出一种透射式消偏振二维二元闪耀光栅。它在两个正交方向上都具有周期性槽形单元,每个槽形单元包含7个子周期。每个子周期的介质占空比在两个方向上是独立的,可同时调制TE和TM偏振态的等效折射率,以此优化光栅偏振特性。本文将等效介质理论拓展到二维情况,设计了以熔石英为基底,工作波段为0.6~0.8μm的高衍射效率消偏振二维二元闪耀光栅。光栅两正交方向周期分别为3.31μm和0.473μm。仿真结果表明,在参考波长0.7μm处TE和TM偏振态衍射效率分别为79.5%和79.6%,0.6~0.8μm波段范围内TE和TM偏振态衍射效率均高于70%,偏振敏感度低于2.6%。与一维二元闪耀光栅相比,二维二元闪耀光栅具有高衍射效率、低偏振敏感度和易制作的优势。所得结论可用于指导实际应用中透射式二元闪耀光栅的设计,可望在光栅型高光谱成像仪中得到应用。

关 键 词:二元闪耀光栅  消偏振  二维结构  衍射效率
收稿时间:2019/8/25 0:00:00
修稿时间:2020/4/2 0:00:00

Design of polarization-independent two-dimensional binary blazed grating
ZHU Jia-Cheng,ZHOU Jian-Kang and SHEN Wei-Min.Design of polarization-independent two-dimensional binary blazed grating[J].Journal of Infrared and Millimeter Waves,2020,39(2):149-156.
Authors:ZHU Jia-Cheng  ZHOU Jian-Kang and SHEN Wei-Min
Affiliation:School of Optoelectronic Science and Engineering, Soochow University, Suzhou 215006, China;Key Lab of Modern Optical Technologies of Education Ministry of China & Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province, Soochow University, Suzhou 215006, China,School of Optoelectronic Science and Engineering, Soochow University, Suzhou 215006, China;Key Lab of Modern Optical Technologies of Education Ministry of China & Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province, Soochow University, Suzhou 215006, China,School of Optoelectronic Science and Engineering, Soochow University, Suzhou 215006, China;Key Lab of Modern Optical Technologies of Education Ministry of China & Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province, Soochow University, Suzhou 215006, China
Abstract:In order to reduce imaging spectrometer’s polarization sensitivity and improve its quantitative measurement accuracy of target’s spectral radiance,a transmission polarization-independent two-dimensional binary blazed grating was proposed.It consists of periodical groove units in both orthogonal directions and there contains7 sub-periods within one groove unit.Duty cycles of sub-periods are independent in two orthogonal directions,so that the effective index of both TE and TM polarizations can be modulated simultaneously,and the grating’s polarization property can be optimized.Through extending the effective medium theory to the two-dimensional pattern,a two-dimensional binary blazed grating with polarization-independent high efficiency on fused silica substrate was designed for wavelength range from 0.6 to 0.8μm.The grating periods in two orthogonal directions are 3.31μm and 0.473μm,respectively.Simulation results show that,for normal incident light,diffraction efficiencies of TE and TM polarizations at reference wavelength 0.7μm are 78.4%and 78.3%,respectively.Within wavelength range from 0.6 to 0.8μm,diffraction efficiencies of TE and TM polarizations are both above70%and the degree of polarization is below 2.6%.Compared with one-dimensional binary blazed grating,the two-dimensional grating has the advantages of high diffraction efficiency,low degree of polarization and easier manufacture.It is expected to be used in grating-type imaging spectrometers.
Keywords:binary blazed grating  polarization-independent  two-dimensional structure  diffraction efficiency
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《红外与毫米波学报》浏览原始摘要信息
点击此处可从《红外与毫米波学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号