| 超薄聚合物表面与滴状冷凝的研究 |
| |
| 引用本文： | 马学虎,徐敦颀.超薄聚合物表面与滴状冷凝的研究[J].化工学报,1993,44(2):165-170. |
| |
| 作者姓名： | 马学虎 徐敦颀 |
| |
| 作者单位： | 大连理工大学化学工程研究所,大连理工大学化学工程研究所,大连理工大学化学工程研究所 大连116012
,大连116012
,大连116012 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 采用等离子体聚合技术在黄铜管外表面制备了六氟丙烯、六甲基二硅氧烷的超薄聚合物薄膜,实现了水蒸气的滴状冷凝.对不同冷凝表面的传热性能进行了实验测定,并对聚合膜的表面性能进行了测试和估算.分析讨论了聚合工艺条件对滴状冷凝传热及膜与基材粘着性能的影响.
|
| 关 键 词： | 滴状冷凝 高聚物 表面性质 |
DROPWISE CONDENSATION ON SUPERTHIN POLYMER SURFACE |
| |
| Ma Xuehu,Xu Dunqi and Lin Jifang.DROPWISE CONDENSATION ON SUPERTHIN POLYMER SURFACE[J].Journal of Chemical Industry and Engineering(China),1993,44(2):165-170. |
| |
| Authors: | Ma Xuehu Xu Dunqi and Lin Jifang |
| |
| Abstract: | Plasma polymerization (or glow discharge polymerization) was employed to prepare superthin polymer film coating on brass tubes from monomers, such as, hexafluoro-propene (HFP) and hexmethyldisiloxane (HMDSO). The experimental results indicated that dropwise condensation of steam could take place. The effects of the discharge power and polymerization time on dropwise condensation heat transfer were investigated. The surface energy of the polymer surfaces was evaluated by the measured contact angles of liquids on the surfaces at room temperature. The thickness of all of the polymer films was less than 0.1μm, so the thermal resistance of the polymer film could be neglected. |
| |
| Keywords: | dropwise condensation plasma polymerization superthin polymer surface sur-facial property |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载全文 |
|
