| 树脂结合剂砂轮表面形貌的激光扫描测量与分析 |
| |
| 引用本文： | 李晓天,孙方宏等. 树脂结合剂砂轮表面形貌的激光扫描测量与分析[J]. 机械科学与技术, 2001, 20(1): 115-116 |
| |
| 作者姓名： | 李晓天 孙方宏等 |
| |
| 作者单位： | 上海交通大学机械工程学院!上海200030 |
| |
| 基金项目： | 国家自然科学基金资助项目! (5 970 5 0 14 ) |
| |
| 摘 要： | 采用激光三维扫描方法 ,对树脂结合剂砂轮的表面形貌进行了测量。测量结果表明 :砂轮表面形貌的形成 ,不仅与砂轮表面磨粒的突出有关 ,还受结合剂表面高度变化的影响。在表面形貌测量结果的基础上 ,对磨削过程进行了仿真 ,可以得到有效磨粒数占磨粒总数的比例 ,以及有效磨粒数在磨削过程中的动态变化过程。
|
| 关 键 词： | 表面形貌 三维扫描 仿真 有效磨粒数 |
| 文章编号： | 1003-8728(2001)01-0115-02 |
| 修稿时间： | 1999-10-26 |
Measurement and Analysis of Surface Topography of Resin Bonded Grinding Wheel by Laser 3D Scanning |
| |
| LI Xiao-tian,SUN Fang-hong,CHENG Ming,WENG Shi-xiu. Measurement and Analysis of Surface Topography of Resin Bonded Grinding Wheel by Laser 3D Scanning[J]. Mechanical Science and Technology for Aerospace Engineering, 2001, 20(1): 115-116 |
| |
| Authors: | LI Xiao-tian SUN Fang-hong CHENG Ming WENG Shi-xiu |
| |
| Abstract: | In this paper, the surface topography of resin bonded grinding wheel was measured by laser 3D scanning. The results show that the topography is affected not only by the protrusion of abrasive grains, but also by the waviness of bond surface. The simulation of grinding process based on the measured topography was also performed, which revealed the percentage of effective grains and the dynamic change of effective grains' number. |
| |
| Keywords: | Surface topography 3D scanning Simulation Effective grains' number |
| 本文献已被 CNKI 维普 等数据库收录！ |
