| 铝合金进歧管铸件的金属型铸造 |
| |
| 引用本文： | 王重厚.铝合金进歧管铸件的金属型铸造[J].特种铸造及有色合金,2001(3):26-27. |
| |
| 作者姓名： | 王重厚 |
| |
| 作者单位： | 无锡铸铝技术研究开发中心 |
| |
| 摘 要： | 介绍了在可倾式金属型浇注机上制造进气歧管的铸造新工艺。为了获得合格的进气歧管铸件，采用压边顶铸浇注系统和覆膜砂壳芯制作工作。并且改进工艺，以消除气孔、收缩和裂纹。
|
| 关 键 词： | 金属型铸造 浇注系统 壳芯 裂纹 微型汽车 铝合金 进气歧管 |
| 文章编号： | 1001-2449(2001)03-0026-02 |
| 修稿时间： | 2000年10月22 |
Aluminum Alloy Inlet
Manifold of Micro-car in Metal Mold Casting |
| |
| Casting Wang Zhonghou.Aluminum Alloy Inlet
Manifold of Micro-car in Metal Mold Casting[J].Special Casting & Nonferrous Alloys,2001(3):26-27. |
| |
| Authors: | Casting Wang Zhonghou |
| |
| Abstract: | A new casting technology for inlet manifold in tilt casting machine for gravity die casting was described. In order to producte qualified inlet manifold casting, top gating system with lip riser and shell core made of precoated sand is used. The gas hole, shrinkage cavity and crack were eliminated through up grading technology. |
| |
| Keywords: | Gravity Die Casting Gating System Shell Core Crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
