| 矿用车辆涡轮增压器结构研究 |
| |
| 引用本文： | 吕秀斌,张翠平,王斌,李天鹏,齐丽丽. 矿用车辆涡轮增压器结构研究[J]. 煤矿机械, 2013, 34(2) |
| |
| 作者姓名： | 吕秀斌 张翠平 王斌 李天鹏 齐丽丽 |
| |
| 作者单位： | 1. 太原理工大学,太原,030024
2. 煤炭科学研究总院太原研究院,太原,030006 |
| |
| 摘 要： | 利用三维CAD软件UG建立了带冷却水套的涡轮增压器涡轮壳的几何模型。利用FLUENT对带水套的涡轮壳和不带水套的涡轮壳的温度场进行了数值模拟计算。结果表明结构改进后的涡轮增压器表面温度得到较大幅度的降低,达到了矿用车辆用涡轮增压器表面温度小于150℃的要求,可以应用于矿用车辆。
|
| 关 键 词： | 矿用车辆 涡轮增压器 温度场 FLUENT |
Structure Research of Turbocharger of Mining Vehicle |
| |
| Abstract: | Creating geometric model of turbocharger turbine shell with cooling water jacket using 3D software named UG.The thermal analyses are researched on turbocharger with water jacket and without water jacket using FLUENT software.It turned out that surface temperature of turbocharger with water jacket has been greatly improved,and it reached requirements of turbochargers of mining vehicle,which is less than 150 ℃.The turbocharger with cooling water jacket could be used by mining vehicle. |
| |
| Keywords: | mining vehicles turbocharger temperature field FLUENT |
| 本文献已被 万方数据 等数据库收录！ |
|
