首页 | 本学科首页   官方微博 | 高级检索  
     

原位生成TiC颗粒对铁基合金组织及性能的影响
引用本文:王宁,高福宝,李世杰,曹晓明.原位生成TiC颗粒对铁基合金组织及性能的影响[J].钢铁钒钛,2005,26(2):62-66,70.
作者姓名:王宁  高福宝  李世杰  曹晓明
作者单位:河北工业大学材料学院,天津,300130
基金项目:河北省基金项目(503060)。
摘    要:通过向Fe—Al-B合金中添加C和Ti元素的方法,在合金中原位生成了TiC颗粒,利用X射线衍射(XRD)、扫描电子显微镜(SEM)和能谱仪分析了添加TiC前后材料中相的变化、显微组织的变化及材料中各相的化学成分。结果表明,在合金中原位生成TiC颗粒后,合金组织明显得到细化,其耐熔锌腐蚀性能及强度也有大幅度提高。

关 键 词:原位生成  铁基复合材料  显微组织  耐熔锌腐蚀
文章编号:1004-7638(2005)02-0062-05

Effect of In - situ Synthesis TiC Particle on Microstructures and Properties of Fe - based Alloy
Wang Ning,Gao Fubao,Li Shijie,Cao Xiaoming.Effect of In - situ Synthesis TiC Particle on Microstructures and Properties of Fe - based Alloy[J].Iron Steel Vanadium Titanium,2005,26(2):62-66,70.
Authors:Wang Ning  Gao Fubao  Li Shijie  Cao Xiaoming
Abstract:The composites reinforced by TiC particle were prepared through in-situ reaction by means of adding C and Ti element to Fe-Al-B alloys. The phases transformation and the change of microstructure and chemical constitution of each phase were analyzed through X-ray diffraction (XRD) analysis, scanning electronic microscope (SEM) and energy spectrometer. The results showed that the grain of alloy was refined and the corrosion resistance of alloy to molten zinc was improved greatly after in-situ formation TiC in alloy matrix.
Keywords:in-situ synthesis  iron-based composites  microstructure  corrosion resistance to molten zinc
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号