| 浅析金属塑性成形数值模拟的系统缺陷 |
| |
| 引用本文： | 李更新.浅析金属塑性成形数值模拟的系统缺陷[J].机械研究与应用,2007,20(5):40-41. |
| |
| 作者姓名： | 李更新 |
| |
| 作者单位： | 威海职业学院,山东,威海,264200 |
| |
| 摘 要： | 以圆柱直齿轮温挤压数值模拟为例,从两个方面分析金属塑性成形数值模拟的系统缺陷及成因,并提出解决办法,对类似的数值模拟有一定的参考价值.
|
| 关 键 词： | 数值模拟 STL格式 系统缺陷 成因 |
| 文章编号： | 1007-4414（2007）05-0040-02 |
| 收稿时间： | 2007-07-20 |
| 修稿时间： | 2007年7月20日 |
A brief talk on system defects of the metal plastic deformation numerical simulation |
| |
| Li Geng-xin.A brief talk on system defects of the metal plastic deformation numerical simulation[J].Mechanical Research & Application,2007,20(5):40-41. |
| |
| Authors: | Li Geng-xin |
| |
| Affiliation: | Weihai vocational college, Weihai Shandong 264200, China |
| |
| Abstract: | Through the example of numerical simulation for spur gear with warm extrusion, the system defects and their causes are analyzed in two aspects; the solutions are advanced in this paper at the same time. It has some guidance significance in the practical case. |
| |
| Keywords: | numerical simulation STL format system defect cause |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
