| 基于Moldflow的手机壳体成型工艺分析 |
| |
| 引用本文： | 王强,刘莹. 基于Moldflow的手机壳体成型工艺分析[J]. 模具工业, 2010, 36(9): 14-17 |
| |
| 作者姓名： | 王强 刘莹 |
| |
| 作者单位： | 1. 苏州经贸职业技术学院机电系,江苏,苏州,215009
2. 南昌大学机电工程学院,江西,南昌,330029 |
| |
| 摘 要： | 用Moldflow对手机壳体注射成型进行工艺参数优化,找出影响塑件翘曲变形的原因并提出改进措施。优化工艺参数后的分析结果与实际生产试模结果非常相近,可为模具设计提供理论依据,提高模具设计效率。
|
| 关 键 词： | 手机壳体 注射模 翘曲 Moldflow |
Study on the molding process of mobile phone shell based on Moldflow |
| |
| WANG Qiang,LIU Ying. Study on the molding process of mobile phone shell based on Moldflow[J]. Die & Mould Industry, 2010, 36(9): 14-17 |
| |
| Authors: | WANG Qiang LIU Ying |
| |
| Affiliation: | 1.Department of Mechatronic,Suzhou Institute of Trade ＆ Commerce,Suzhou,Jiangsu 215031,China;2.School of Mechanical and Electrical Engineering,Nanchang University,Nanchang,Jiangxi 330029,China) |
| |
| Abstract: | Moldflow software was used to optimize the injection parameters for molding a mobile phone shell.The cause of warping and influencing factors were found and an actual improvement measure was put forward.The analysis results show great agreement with practical production data. |
| |
| Keywords: | Moldflow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
