| 油气田用SUP13Cr5Ni2Mo超级马氏体不锈钢热变形加工图研究 |
| |
| 引用本文： | 方旭东,王岩,夏焱,李莎,李阳. 油气田用SUP13Cr5Ni2Mo超级马氏体不锈钢热变形加工图研究[J]. 特殊钢, 2018, 39(5): 1-4 |
| |
| 作者姓名： | 方旭东 王岩 夏焱 李莎 李阳 |
| |
| 作者单位： | 1太原钢铁(集团)有限公司先进不锈钢材料国家重点实验室，太原030003 ；2山西太钢不锈钢股份有限公司技术中心，太原030003 |
| |
| 基金项目： | 国家重点研发计划课题(2016YFB0300204)资助 |
| |
| 摘 要： | 在Gleeble-3800热模拟试验机上,研究了SUP13Cr5Ni2Mo合金的热塑性及热变形行为,并建立了合金的热加工图。结果表明,在900～1 300℃,合金均具有较好的热塑性;通过热加工图分析得出,合金适宜初始加工温度范围在1 100～1 200℃,采用此参数变形获得的组织细小均匀。
|
| 收稿时间： | 2018-04-10 |
Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field |
| |
| Fang Xudong,Wang Yan,Xia Yan,Li Sha,Li Yang. Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field[J]. Special Steel, 2018, 39(5): 1-4 |
| |
| Authors: | Fang Xudong Wang Yan Xia Yan Li Sha Li Yang |
| |
| Affiliation: | 1 State Key Laboratory of Advanced Stainless Steel, Taiyuan Iron and Steel Group Company Limited, Taiyuan 030003 ；2 Technology Center, Shanxi Taigang Stainless Steel Co. , Ltd, Taiyuan 030003 |
| |
| Abstract: | The thermo plastic and thermo deformation characteristics of SUP13Cr5Ni2Mo alloy were studied by using Gleeble-3800 thermal simulation test machine, and the hot processing maps were established. The results show that： In the range of 900 ~ 1 300°C, the alloys have good thermoplastic ；The suitable processing of initial in a temperature range between 1 100 ~ 1 200 °C through hot processing map analysis, and the deformation microstructure sample is fine and uniform by using this parameters. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载免费的PDF全文 |
|
