| 水性环氧磷酸酯乳液的制备及其性能研究 |
| |
| 引用本文： | 陈玉娴,陈磊,张定军,白雪,吴彦飞,赵文锦,陈振斌,马应霞. 水性环氧磷酸酯乳液的制备及其性能研究[J]. 涂料工业, 2018, 48(3): 13-17. DOI: 10.12020/j.issn.0253-4312.2018.3.13 |
| |
| 作者姓名： | 陈玉娴 陈磊 张定军 白雪 吴彦飞 赵文锦 陈振斌 马应霞 |
| |
| 作者单位： | 1. 兰州理工大学材料科学与工程学院,兰州 7300502. 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州 7300503. 中国科学院兰州化学物理研究所固体润滑国家重点实验室,兰州 730000 |
| |
| 摘 要： | 以85%的磷酸和双酚A型环氧树脂(E51)为原料,采用自乳化法制备水性环氧磷酸酯乳液。采用傅里叶红外光谱(FT-IR)对反应前后物质的结构进行了表征。研究了产物在不同条件下的黏度、硬度、涂膜附着力、耐水煮性等性能的变化,探讨了游离磷酸、单磷酸酯和双磷酸酯等对产物性能的影响。结果表明:反应产物中引入大量的亲水基团,使产物具有良好的水可分散性;当磷酸羟基与环氧基的物质的量比为3∶2、产物黏度为2 326 mPa·s时,制备的水性环氧磷酸酯乳液的综合性能最好;当单磷酸酯含量较高时,有利于提高产物涂层与金属基底的附着力和耐水煮性。
|
| 关 键 词： | 自乳化法 水性环氧磷酸酯乳液 磷酸 环氧树脂 |
| 收稿时间： | 2018-01-22 |
Preparation and Properties of Waterborne Epoxy Phosphate Emulsion |
| |
| Chen Yuxian,Chen Lei,Zhang Dingjun,Bai Xue,Wu Yanfei,Zhao Wenjin,Chen Zhenbin,Ma Yingxia. Preparation and Properties of Waterborne Epoxy Phosphate Emulsion[J]. Paint & Coatings Industry, 2018, 48(3): 13-17. DOI: 10.12020/j.issn.0253-4312.2018.3.13 |
| |
| Authors: | Chen Yuxian Chen Lei Zhang Dingjun Bai Xue Wu Yanfei Zhao Wenjin Chen Zhenbin Ma Yingxia |
| |
| Affiliation: | Lanzhou University of Technology School of Materials Science and Engineering, Lanzhou 730050 Lanzhou University of Technology China State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou 730050 State Key Laboratory of solid lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730050 |
| |
| Abstract: | A waterborne epoxy phosphate emulsion was prepared by self-emulsifying method using 85% phosphoric acid and E51. The structure of the E51 and the product were characterized by Fourier transform infrared spectroscopy (FT-IR). The change of its properties such as viscosity, hardness, coating adhesion and boiling resistance were studied under different conditions. Meanwhile, the effects of various factors such as free phosphoric acid, monophosphate and bisphosphonates on the properties of the product were investigated. The results showed that a large amount of hydrophilic groups were introduced into the reaction product, and the product had good water dispersibility. When the molar ratio of hydroxyl group of phosphoric acid to epoxy group was 3∶2 and the viscosity of the product was 2 326 mPa·s, the comprehensive performance of waterborne epoxy phosphate emulsion was the best. When the monophosphate was higher, the adhesion and boiling resistance of the product-based coating on the metal substrate are improved. |
| |
| Keywords: | self-emulsification method waterborne epoxy phosphate emulsion phosphoric acid epoxy resin |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《涂料工业》浏览原始摘要信息 |
|
点击此处可从《涂料工业》下载全文 |
|
