| 面向生产线级的PC构件排产模式研究 |
| |
| 引用本文： | 靳华中, 邹贻权, 朱振帆, 刘阳. 面向生产线级的PC构件排产模式研究[J]. 土木建筑工程信息技术,2018, 10(2): 88-93.doi: 10.16670/j.cnki.cn11-5823/tu.2018.02.18 |
| |
| 作者姓名： | 靳华中 邹贻权 朱振帆 刘阳 |
| |
| 作者单位： | 1.湖北工业大学计算机学院，武汉 430068; 2.湖北工业大学土木建筑与环境学院，武汉 430068 |
| |
| 基金项目： | “十三五”国家重点研发计划项目“基于BIM的预制装配建筑体系应用技术”2016YFC0702000“十三五”国家重点研发计划课题“装配式建筑分析设计软件与预制构件数据库的研究开发”2016YFC0702002 |
| |
| 摘 要： | 产能是反映预制构件工厂生产的关键指标之一，构件排产模式直接影响预制构件生产效率高低和产能的大小。本文针对自动化程度较高的外墙流水线，通过Anylogic模拟仿真实验，分析和计算自由节拍和固定节拍排产模式的PC构件产能，探讨不同排产模式的适用条件。
|
| 关 键 词： | PC构件 排产模式 自由节拍模式 固定节拍模式 |
Research on Production Arrangement Modes of PC Components for the Production Line |
| |
| Jin Huazhong,Zou Yiquan,Zhu Zhenfan,Liu Yang. Research on Production Arrangement Modes of PC Components for the Production Line[J]. Journal of Information Technology in Civil Engineering and Architecture, 2018, 10(2): 88-93. DOI: 10.16670/j.cnki.cn11-5823/tu.2018.02.18 |
| |
| Authors: | Jin Huazhong Zou Yiquan Zhu Zhenfan Liu Yang |
| |
| Affiliation: | 1.School of Computer Science, Hubei University of Technology, Wuhan 430068, China; 2.School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China |
| |
| Abstract: | The production capacity is one of the key indicators reflecting the factory producing prefabricated components, and the production arrangement mode of the components will have direct effects on the production efficiency and capability of prefabricated components. This paper applies the simulation experiment using Anylogic for the better automatized external wall prefabrication line, to analyze and calculate the productivity of PC components under the free-beat and fixed-beat production arrangement modes, respectively, and to discuss the applicable conditions for different production arrangement modes. |
| |
| Keywords: | PC Component Production Arrangement Mode Free-Beat Mode Fixed-Beat Mode |
| 本文献已被 CNKI 等数据库收录！ |
