| 太钢减荷烧结技术试验研究 |
| |
| 引用本文： | 赵建伟,贺淑珍. 太钢减荷烧结技术试验研究[J]. 中国冶金, 2011, 21(10): 23-27 |
| |
| 作者姓名： | 赵建伟 贺淑珍 |
| |
| 作者单位： | 山西太钢不锈钢股份（有限）公司，山西太原 030003 |
| |
| 摘 要： | 针对700 mm以上的高料层烧结过程中，出现烧结过程料层透气性恶化的问题，在太钢技术中心进行了采 用支撑板改善烧结过程料层透气性的烧结杯试验研究，试验结果表明:采用350 mm高度支架支撑作用效果最好， 料层收缩显著降低，利用系数提高了15.2%，转鼓强度保持原有水平，烧结矿冶金性能改善。
|
| 关 键 词： | 高料层烧结 支撑板 烧结过程透气性 产量 |
Experimental Study on the Load Reduction Sintering Process for TISCO |
| |
| ZHAO Jian-wei,HE Shu-zhenCo.,Ltd.,Taiyuan ,Shanxi,China). Experimental Study on the Load Reduction Sintering Process for TISCO[J]. China Metallurgy, 2011, 21(10): 23-27 |
| |
| Authors: | ZHAO Jian-wei HE Shu-zhenCo. Ltd. Taiyuan Shanxi China) |
| |
| Affiliation: | ZHAO Jian-wei,HE Shu-zhen(Technology Center of Taiyuan Iron and Steel(Group)Co.,Ltd.,Taiyuan 030003,Shanxi,China) |
| |
| Abstract: | Aimed to bad permeability in sintering process while the bed of material is above 700 mm,a new technology-supporting sintering process was presented in this paper.The influence of stand-support and its height on technico-economic-indices were also studied under laboratory condition.The results showed that applying 350 mm stand-support was best;the bed shrinkage was decreased obviously;the productivity increased by maximum 15.2% and the drum index retained former level.The metallurgical properties of sinter ... |
| |
| Keywords: | deep bed sintering stand-support permeability in sintering process productivity |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
