| 轧机压下孔内过渡锥孔加工装置设计 |
| |
| 引用本文： | 邓勇,冯萍,向小庆.轧机压下孔内过渡锥孔加工装置设计[J].重型机械科技,2008(1):29-30. |
| |
| 作者姓名： | 邓勇 冯萍 向小庆 |
| |
| 作者单位： | 邓勇（中国第二重型机械集团公司,四川618013）;冯萍（中国第二重型机械集团公司,四川618013）;向小庆（中国第二重型机械集团公司,四川618013） |
| |
| 摘 要： | 针对11OOmm粗轧机机架的加工难点，设计了在普通镗床上加工轧机压下孔内过渡锥孔的加工装置。
|
| 关 键 词： | 轧机压下孔 过渡锥孔 加工装置设计 |
| 修稿时间： | 2007年10月10 |
The Design of Machining Device for the Transition Tapered Hole in the Bore of Rolling Mill Screwdown Mechanism |
| |
| Deng Yong,Feng Ping,Xiang Xiaoqing.The Design of Machining Device for the Transition Tapered Hole in the Bore of Rolling Mill Screwdown Mechanism[J].Heavy Machinery Science and Technology,2008(1):29-30. |
| |
| Authors: | Deng Yong Feng Ping Xiang Xiaoqing |
| |
| Affiliation: | Deng Yong, Feng Ping, Xiang Xiaoqing |
| |
| Abstract: | Aiming at the machining difficulties of 1 100 mm rough rolling mill,the machining device for the transition tapered hole in the bore of rolling mill screwdown mechanism has been designed to be used on common boring machines. |
| |
| Keywords: | the bore of rolling mill screwdown mechanism transition tapered hole machining device design |
| 本文献已被 CNKI 维普 等数据库收录！ |
