| 超高速磨床结构建模的研究 |
| |
| 引用本文： | 朱爽.超高速磨床结构建模的研究[J].沈阳电力高等专科学校学报,2014(3):275-279. |
| |
| 作者姓名： | 朱爽 |
| |
| 作者单位： | 沈阳工程学院机械学院,辽宁沈阳110136 |
| |
| 摘 要： | 以某超高速磨削机床为研究对象,利用三维软件Pro/E对超高速磨削机床进行了CAD建模,利用吉村允孝积分法确定结合部参数,建立结合部动力学模型.利用Ansys软件对其进行网格划分,建立了超高速磨床的有限元模型,并通过模态分析和实验来检验有限元模型,为研究超高速磨床的动态特性做好准备.
|
| 关 键 词： | 超高速 磨削 动态特性 建模 |
Study on Structural Modeling of Ultra-High-Speed Grinder |
| |
| ZHU Shuang.Study on Structural Modeling of Ultra-High-Speed Grinder[J].Journal of Shenyang Electric Power Institute,2014(3):275-279. |
| |
| Authors: | ZHU Shuang |
| |
| Affiliation: | ZHU Shuang (School of Mechanics, Shenyang Institute of Engineering,Shenyang 110136, Liaoning Province) |
| |
| Abstract: | Taking one ultra-high speed grinder as the research object, the CAD modeling of ultra-high speed grinder is carried out with the three-dimensional software Pro/E. Then the dynamics model of the junction is set up based on the parameters determined by the integration of a village done filial piety integral method. Meshing with Ansys software, the finite element model of ultra-high speed grinder is established, and verified through the mode analysis and experiment. This will be prepared for the study on the dynamic behavior of the ultra-high speed grinder. |
| |
| Keywords: | ultra-high-speed grinding dynamic characteristic modeling |
| 本文献已被 维普 等数据库收录！ |
|
