| 瓶子—盖输送装配装置研制 |
| |
| 引用本文： | 高雪,王宏祥,朱起云. 瓶子—盖输送装配装置研制[J]. 装备制造技术, 2014, 0(9): 62-64 |
| |
| 作者姓名： | 高雪 王宏祥 朱起云 |
| |
| 作者单位： | 辽宁工业大学机械工程与自动化学院,辽宁锦州,121001 |
| |
| 基金项目： | 辽宁省大学生创新创业项目 |
| |
| 摘 要： | 本装置由机械部分和控制部分组成,机械部分包括输送机构、旋盖机构、夹瓶机构、挡瓶机构四个总成。电机通过链传动的带动下与输送带的主动辊相连接,输送带在电机的带动下不断将瓶子向前输送。挡瓶机构和夹紧都是由气缸实现,当光电传感器检测到瓶子的信号后,挡瓶机构和夹紧机构的气缸伸出。控制系统由PLC、继电器、电磁阀、开关电源组成。
|
| 关 键 词： | 旋盖机 旋盖头 振动给料 |
The Design of Bottle-cover Assembly Device |
| |
| GAO Xue,WANG Hong-xiang,ZHU Qi-yun. The Design of Bottle-cover Assembly Device[J]. , 2014, 0(9): 62-64 |
| |
| Authors: | GAO Xue WANG Hong-xiang ZHU Qi-yun |
| |
| Affiliation: | (College of Mechanical Engineering ＆ Automation, Jinzhou Liaoning 121001, China) |
| |
| Abstract: | The device is composed of a mechanical part and control part is composed of two parts,the mechanical part comprises a conveying mechanism,capping mechanism,bottle clamping mechanism,a bottle body four assembly. Motor through the chain transmission drive and drive roller conveyor belt conveyor belt is connected,driven by the motor to keep the bottle forward delivery. The bottle blocking mechanism and the clamping is composed of cylinder,a signal when the photoelectric sensor detects the bottle after bottle blockingmechanism,cylinder and clamping of the extended.The control system consists of a PLC,relay,electromagnetic valve,switch power supply. |
| |
| Keywords: | capping machine capping head vibration feeder |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
